Installation Options; Individual Unit; Side By Side; Individual Appliances With Partition - Bosch B24IW50NSP Installation Instructions Manual

Installation options

There are many different installation options.
These are limited only by the design of the kitchen and
the function of the finger guard.

Individual unit

Side by Side

*
* Partition required!
When 2 appliances are installed Side by Side,
i
the Basic Combination Side by Side Sealing kit
must be used to ensure a stable connection.
See the section on Optional accessories" on
page 17.
6

Individual appliances with partition

1.
3.
*
Note
i
- When dimensioning the partition for model 4, note
the thickness of the furniture fronts to prevent
damage if the doors are opened at the same time.
Use the Extreme Combination Side by Side
-
Heating kit if the gap between the appliances is
less than 6" (160 mm).
See the section on Optional accessories" on
page 17.
- Minimum thickness of the partition

At the end of the kitchen units

If one side of the appliance is visible, a side panel must
be used.
The side panel must be connected firmly to the wall,
the floor and overhead furniture/fixtures before the
appliance is placed in the cavity.
The dimensions of the side panel are taken from the
opposite cavity wall. During installation ensure that the
cavity is square and the exact size.
Get other manuals https://www.bkmanuals.com
2.
4.
5
/ " (16 mm).
8