Installation Options; Individual Unit; Side-By-Side; Individual Appliances With Partition - Bosch B18 Series Installation Instructions Manual

Installation options

There are many different installation options.
These are limited only by the design of the kitchen and the
function of the finger guard.

Individual unit

Side-by-Side

* Partition required!
When 2 appliances are installed Side-by-Side, the Basic
Combination Side-by-Side Sealing kit must be used to
ensure a stable connection.
See the section on "Optional accessories" on page 16.

Individual appliances with partition

– When dimensioning the partition for model 4, note the
thickness of the furniture fronts to prevent damage if the
doors are opened at the same time.
– Use the Extreme Combination Side-by-Side Heating kit
if the gap between the appliances is less
than 6" (160 mm).
See the section on "Optional accessories" on page 16.
– Minimum thickness of the partition

At the end of the kitchen units

If one side of the appliance is visible, a side panel must be
used.
The side panel must be connected firmly to the wall, the floor
and overhead furniture/fixtures before the appliance is
placed in the cavity.
The dimensions of the side panel are taken from the opposite
cavity wall. During installation ensure that the cavity is square
and the exact size.
5
/ " (16 mm).
8
5