Showing The Pop-Up; Pop-Up Setting Page - Sony IPELA SNC-RZ30N User Manual

3
Hold down the mouse left button and drag it
diagonally.
The portion marked with a red frame determines the
activity detection working area.
As the default setting, the whole area is set as the
activity detection working area.
Note
Before using the activity detection, perform the
operation test to confirm correct operation.
The activity detection may not operate correctly in the
following cases:
– when the Stabilizer menu is set to On on the Camera
setting page
– when the Day/Night function is activated on the
Camera setting page
– while changing a setting on the Camera setting page
– when the Focus mode menu is set to Auto on the
Camera setting page
– while zooming in
– when the object is dark
– when the camera is installed in an unstable place that
causes vibration to the camera

Showing the Pop-up

— Pop-up setting Page

When you click Pop-up on the Administrator menu, the
Pop-up setting page appears.
Use this page to set up for displaying a pop-up with your
favorite message on the computers monitoring the
camera image, or for displaying a pop-up automatically
when there is an alarm input.
Manual pop-up text
Type the text to be displayed on a pop-up between 1 and
64 characters.
Click Apply to display the pop-up on all the computers
monitoring the camera.
Alarm pop-up text
Display mode
Select the computer on which you want to display a pop-
up when an alarm is input.
Administrator: The pop-up is displayed only on the
computer monitoring the camera image as the
Administrator.
All users: The pop-up is displayed on all the computers
monitoring the camera image.
Sensor 1/Sensor 2/Sensor 3/Activity detection
Select On to show a pop-up when an alarm occurs by the
corresponding sensor. Select Off not to show it.
On each text box, type the text to be displayed on the
pop-up between 1 and 64 characters.
OK/Cancel
See "Buttons common to every setting page" on page
16.
Showing the Pop-up — Pop-up setting Page
45