Led Indicators - Axis Q1604 E User Manual

AXIS Q1604–E Network Camera
Hardware overview

LED Indicators

LED indicators in camera
LED Color
Network Green
Amber
Unlit
Status Green
Amber
Red
Power
Green
Amber
Note
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to be unlit during normal operation, or to flash only when the camera is accessed. To
configure, go to Setup > System Options > LED settings. See the online help files for more information.
• The Status LED can be configured to flash for identifying the unit. This can be done under Setup > System Options >
Maintenance.
Status LED on housing (fan and heater)
Color Indication
Green OK
Flashing Single flash: Heater error
green Double flash: Fan error
Triple flash: General error
Alarm events will be triggered through the camera's input port.
See the User's Manual, available on the CD provided with this product, or from www.axis.com
Contact your Axis reseller for information about spare parts and troubleshooting.
All manuals and user guides at all-guides.com
1
2
3.3 V max 50 mA
3
4
Indication
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Steady for connection to 10 Mbit/s network. Flashes for network activity.
No network connection.
Steady green for normal operation.
Steady during startup, during reset to factory default or when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
9