Bissell PROHEAT 2X LIFT-OFF 2072N User Manual page 2

A
1
2
3
4
6
7
8
9
13
14
A-2
22 23
C-1
2
www.BISSELL.eu
5
ASSEMBLY INSTRUCTIONS
10
20
12
11
15
Slide the upper handle onto
the body of the machine by
guiding the 2 posts on the
body into the opening on
the upper handle.
24 25
1.
16
17
ASSEMBLY INSTRUCTIO
18
IMPORTANT
19
Use a minimum of a #2 x 4" or #2 x 100mm Philips screwdriver for assembly.
Slide the upper handle onto
the body of the machine by
guiding the 2 posts on the
body into the opening on
21
the upper handle.
Firmly holding the upper
handle in place, screw 2
screws into the marked
holes at an upward angle
above the support handle.
2.
B
a. b.
ASSEMBLY I
1.
IMPORTANT
Use a minimum of a #2 x 4" or #2 x 100mm Philips screwdriver for ass
Slide the upper handle onto
2.
the body of the machine by
guiding the 2 posts on the
body into the opening on
the upper handle.
Firmly holding the upper
3.
handle in place, screw 2
screws into the marked
holes at an upward angle
above the support handle.
At an upward angle, screw
4.
the remaining 2 screws into
the marked outermost holes
under the support handle.
5.
6.
IMPO
Use a minimum of a #2 x 4" or #2
Firmly hol
handle in
screws in
holes at a
above the
At an upw
the remain
the marke
under the