Table of Contents
Advertisement
Changing the menu settings
Icon/item
LCD B. L.
LCD COLOUR
VF B.L.
CONTINUOUS
QUALITY
FLD./FRAME
PRINT MARK
PROTECT
SLIDE SHOW
DELETE ALL
FORMAT
PHOTO SAVE
Notes on LCD B.L. and VF.B.L.
•When you select BRIGHT, battery life is reduced by about 10 percent during recording.
•When you use power sources other than the battery pack, BRIGHT is automatically selected.
Notes on formatting
•Supplied or optional "Memory Stick"s have been formatted at factory. Formatting with this
camcorder is not required.
•Do not turn the POWER switch or press any button while the display shows FORMATTING.
•You cannot format the "Memory Stick" if the write-protect tab on the "Memory Stick" is set to LOCK.
•Format again if the message
Formatting erases all information on the "Memory Stick"
Check the contents of the "Memory Stick" before formatting.
•Formatting erases sample images on the "Memory Stick."
•Formatting erases the protected image data on the "Memory Stick."
88
Mode
Meaning
z BRT NORMAL
To set the brightness on the LCD screen normal
BRIGHT
To brighten the LCD screen
—––
To adjust the colour on the LCD screen, turning the
SEL/PUSH EXEC dial to adjust the following bar
To lighten
z BRT NORMAL
To set the brightness in the viewfinder normal
To brighten the viewfinder
BRIGHT
Not to record continuously
z OFF
To record 9 images continuously (p. 107)
MULTI SCRN
To record still images in the fine image quality mode,
z FINE
using the "Memory Stick"
To record still images in the standard image quality
STANDARD
mode, using the "Memory Stick"
z FIELD
To record moving subjects
To record stopping subjects in high quality
FRAME
To cancel print marks on still images
z OFF
To write a print mark on the recorded still images you
ON
want to print out later
Not to protect still images
z OFF
To protect selected still images against accidental
ON
erasure (p. 128)
––––
To play back images in a continuous loop (p. 126)
To delete all the images (p. 131)
––––
To cancel formatting
z RETURN
To format an inserted "Memory Stick"
FORMAT
1. Select FORMAT with the SEL/PUSH EXEC dial,
then press the dial.
2. Turn the SEL/PUSH EXEC dial to select FORMAT,
then press the dial.
3. After EXECUTE appears, press the SEL/PUSH
EXEC dial. FORMATTING appears during
formatting. COMPLETE appears when formatting is
finished.
––––
To duplicate still images (p. 117)
appears.
To darken
POWER
switch
VTR/PLAYER
CAMERA
MEMORY
VTR/PLAYER
CAMERA
MEMORY
VTR/PLAYER
CAMERA
MEMORY
MEMORY
VTR/PLAYER
MEMORY
MEMORY
VTR/PLAYER
MEMORY
VTR/PLAYER
MEMORY
MEMORY
VTR/PLAYER
MEMORY
VTR/PLAYER
MEMORY
VTR/PLAYER
Advertisement
Table of Contents
