NETGEAR WAX618-111NAS User Manual page 85

Insight Managed WiFi 6 AX3000 Access Point Model WAX618
4. Select Management > Configuration > Wireless > Basic > Wireless Settings.
The following descriptions apply to both radios, but you can specify the radio settings
for the 2.4 GHz and 5 GHz radios individually.
5. Configure the following settings:
• Turn Radio ON: By default, the Turn Radio ON check box is selected and the
radio broadcasts. Turning off a radio disables WiFi access for the band, which
can be helpful during configuration, network tuning, or troubleshooting.
• Wireless Mode:
Select one of the following wireless modes (WiFi modes) for the 2.4 GHz radio:
- 11ax: 802.11ax, 802.11ng, 802.11bg, and 802.11b WiFi clients can connect
to the access point. This is the default setting.
- 11ng: 802.11ax, 802.11ng, 802.11bg, and 802.11b WiFi clients can connect
to the access point. However, the speed of 802.11ax clients is limited to the
maximum speed that is supported by 802.11ng (about 400 Mbps).
- 11bg: 802.11ax, 802.11ng, 802.11bg, and 802.11b WiFi clients can connect
to the access point. However, the speed of 802.11ax and 802.11ng clients is
limited to the maximum speed that is supported by 802.11bg (about 54 Mbps).
- 11b: 802.11ax, 802.11ng, 802.11bg, and 802.11b WiFi clients can connect
to the access point. However, the speed of 802.11ax, 802.11n, and 802.11bg
clients is limited to the maximum speed that is supported by 802.11b (about
11 Mbps).
Manage the Basic Radio
Features
85 User Manual