NETGEAR WAX618-111NAS User Manual page 259

Insight Managed WiFi 6 AX3000 Access Point Model WAX618
4. Use the lock screw to lock the metal bracket into place.
5. Use the four short screws to attach the mounting plate to the T-bar.
6. Connect an Ethernet cable (if you use a PoE+ switch) or both a power adapter and
an Ethernet cable to the access point before you attach the access point to the
mounting plate.
The access point sits flat on the ceiling surface when it is mounted.
Mount the Access Point to a Wall
or Ceiling
259 User Manual