Table of Contents
Advertisement
Available languages
Available languages
When handling the child safety seat with the ISOFIX
system make sure not to damage the seats or other
parts of the vehicle interior.
Child safety seats with TOP TETHER
system
At the rear of the back rests of the side rear seats (as well as the
front passenger seat), there are fixing lugs used to fix the straps
of a child seat with the TOP TETHER system.
When mounting and dismounting a child safety seat
with the TOP TETHER system it is necessary that you
follow the instructions of the child safety seat
manufacturer.
Only use child safety seats with TOP TETHER system
on seats equipped with fastening lugs.
Always fix only one fastening belt of the child safety
seat to the fastening lug.
The fastening belt of the child safety seat must not be
fixed to other place than to the respective fastening
lug!
Under no circumstances you may make adjustments in
your car, e.g. mounting screws or another anchorage.
ISOFIX adaptor
The ISOFIX adapter is tested and approved for being combined
with BABY-SAFE i-SIZE plus.
Neither of the two parts may be used together with
other ISOFIX adaptors or child safety seat trays.
Control and approval according to
Britax / RÖMER child
safety eat
Group
BABY-SAFE i-SIZE plus
Use with ISOFIX fastening and
support leg (universal; specifically
by the type of car)
When using the child seat with a base equipped with a supporting
leg, make sure that the supporting leg is firmly set upon the floor
of the vehicle as opposed to being suspended in the air or lifting
the seat base off of the sitting surface.
Can be fastened by means of ISOFIX adaptor as long as the use of
the adaptor is approved universally or specificaůůy for the car. The
seat shall only be used in cars listed in the attached list of motor
vehicles. The list of vehicle types is updated regularly. Latest
versions are available at
www.britax.eu nebo www.roemer.eu.
ECE R 44/04
Body weight
0+
up to 13 kg
19
EN
Advertisement
Chapters
Table of Contents
