Advertisement
Daily Reference Guide
PROGRAMS TABLE
Programs description
Eco 50°
- Program is suitable to clean normally soiled table-
ware, that for this use, it is the most efficient program in terms
of its combined energy and water consumption, and that it is
used to assess compliance with the EU Ecodesign legislation.
Auto Intensive 65°
program for heavily soiled dishes and
pans.
Auto Mixed 55°
- Automatic pro-
gram for normally soiled dishes with
dried food residues.
Auto Fast 50°
- Automatic program
for normally and lightly soiled
dishes. The everyday cycle that
ensure optimal cleaning and drying
performance in shorter time.
Rapid 45°
- Program is recommended for limited amount
of lightly-soiled dishes with no dried food residues. Does not
include the drying phase.
Crystals 45°
- Program for delicate items, which are more sen-
sitive to high temperatures, for
Prewash
- Use to refresh crockery planned to be washed
later. No detergent is to be used with this program.
Self-Clean 65°
- Program to be used to perform mainte-
nance of the dishwasher, to be carried out only when the
dishwasher is EMPTY using specific detergents designed for
dishwasher maintenance.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and
pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-
bration. The sensor calibration can increase program duration by up to 20 min.
OPTIONS AND FUNCTIONS
OPTIONS can be selected/ deselected, after choosing the program, directly by pressing the corresponding button (if available - the indicator lights up)
(see CONTROL PANEL). If an option is not compatible with the selected program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and
beeps will sound. The option will not be enabled. An option can change time or water or energy consumption for the program.
POWER CLEAN® - Thanks to the additional power jets this option
provides a more intensive and powerful wash in the lower rack, in the
specific area. This option is recommended for washing pots and casseroles
(please refer to the Power Clean® in loading section).
HALF LOAD - If there are not many dishes to be washed, HALF LOAD
is used to save water, electricity or time, depending on the selected program.
Remember to reduce the amount of detergent.
EXTRA DRY - The higher temperature during the final rinse and the
extended drying phase allows for improved drying. The EXTRA DRY
option results in the lengthening of the wash cycle.
SILENT - Suitable for night-time operation of the appliance. This option
can be used to limit noise emissions during wash phases. It will increase
cycle time depending on base cycle selection.
SANI RINSE - This option can be used to sanitize washed dishes. It will
increase the final rinse temperature and add an antibacterial wash to the
selected program. Ideal to clean crockery and feeding bottles. The dishwasher
door must be kept shut for the entire duration of the program in order to
guarantee a reduction of germs. If the door is opened the indicator lamp
starts flashing.
WARNING: the crockery and plates could be extremely hot at the end
of the cycle.
SENSING - When the sensor is detecting the soil level an
animation appears in the display (around 20 min.) and the cycle
duration is updated. SENSING is for the level of soiling on the dishes and is
present for all cycles (excepting Eco) adjusting the program accordingly.
KEYLOCK - A long press (for 3 seconds) of SILENT button, will activate
the KEYLOCK function. The KEYLOCK function will block the control panel
except for the ON/OFF button. To deactivate the KEYLOCK, long press again.
-
WATER TAP CLOSED
Alarm
water tap is closed.
- Automatic
Senses the level of so-
iling on the dishes and
adjusts the program
accordingly. When the
sensor is detecting the
soil level an animation
appears in the display
and the cycle duration
is updated.
example,
glasses and cups.
-
Flashes, when there is no inlet water or
Available
options
*)
-
-
-
-
-
DELAY
The start of the program may be delayed for a period of time
between 0:30 and 24 hours.
1. Select the program and any desired options. Press the DELAY button
(repeatedly) to delay the start of the program. Adjustable from 0:30 to 24
hours. Once the 24 hours setting is reached, press the DELAY another time
to deactivate the DELAY function.
2. Close the door and press the START/Pause button. The timer will begin
counting down.
3. Once this time has elapsed, the indicator light switches off and the program
begins automatically.
The DELAY function cannot be set once a program has been started.
-
DESCALE
Alarm - Limescale accumulation was detected on internal
components of the appliance. Check if the Water Hardness Setting is
at the correct value and salt is present in the salt container (see FIRST TIME
USE), then use a descaling product (WPro brand is recommended) with
Self-Clean program. After a successful descaling, the icon will stop being
displayed.
If the actions above are not performed, product performance will deteriorate.
DESCALE warning will start blinking and «dES» alarm will appear on the
display. If still no action is taken, the appliance will only allow a certain
number of cycles to be started (indicated during «dES» alarm display)
and then will be BLOCKED to prevent component damage, with only
the Self-Clean program available. Performing a full descaling will unblock
the product. In the case of extremely high amounts of limescale, descaling
may have to be performed twice to be efficient.
NaturalDry - It is a convection drying system which automatically opens
the door during/after the drying phase to ensure exceptional drying
performance every day. The door opens at a temperature that is safe to
your kitchen furniture, thus door will not be opened when the option of
SANI RINSE is on.
As additional steam protection, specially designed protection foil is added
together with the dishwasher.
To see how to mount protection foil please refer to the INSTALLATION GUIDE.
This feature is active by default, but it is possible to deactivate it in
the "SETTINGS MENU".
Duration
Water
Energy
of wash
consumption
consumption
program
(litres/cycle)
(kWh/cycle)
(h: min)
**)
3:30
9.5
2:25 - 3:10
15.5 - 24.5
1.30 - 1.70
1:20 - 3:00
7.5 - 19.5
0.75 - 1.20
1:00 - 1:50
7.5 - 15.5
0.70 - 1.10
0:30 - 0:40
10.0 - 12.0
0.55 - 0.65
1:40 - 1:50
12.5 - 16.5
0.95 - 1.20
0:12
4.5
1:15
11.0
EN
0.76
0.10
1.10
3
Advertisement
