Table of Contents
Advertisement
13. USB 2.0 headers/connector (10-pin USB56, USB78 / USB9, USB9)
These headers/connector are for USB 2.0 ports. Connect the USB cables to
the headers/connector. The USB headers/connector comply with USB 2.0
specification that supports up to 480 Mbps connection speed.
Connector type
CAUTION! Never connect a 1394 cable to the USB connector. Doing so will
damage the motherboard.
NOTE: The USB cable is purchased separately.
14. COM Port headers (10-pin COM3 - COM6)
These headers are for serial (COM) ports. Connect the serial port cables to
these headers, then install the module to a slot opening at the back of the
system chassis.
A
Connector type
NOTE: The serial port cable is purchased separately.
2-22
A B
C
Header 2x5p, K9, 2.54mm pitch
B
C
D
Header 2x5p, K10, 2.54mm pitch
USB_56
A
PIN 1
USB_78
B
PIN 1
COM3
A
COM4
B
COM5
C
PIN 1
COM6
D
USB9
C
PIN 1
H610M-IM-A
Advertisement
Table of Contents
