Dometic ACC3100D Installation Manual page 18

Roof thickness (W)
49 mm ... 60 mm
2. Feed the cables through the key hole bushing of the heat exchanger unit.
Fig.  on page 4
3. Insert the spacers into the screw holes from the upper side of the heat exchanger unit.
Fig.  on page 5
4.
NOTICE! Damage hazard
Ensure that no cable is pressed in or pinched.
Align the heat exchanger unit to the roof top unit.
5. Fasten the heat exchanger unit though the ceiling to the roof top unit with the 12 bolts supplied with the fixing
kit. Tighten the bolts using a torque spanner and a fastening torque of max. 1.2 Nm.
Installing the interior cover
1. Feed the cables through the key hole bushing of the interior cover.
Fig.  on page 5
2.
NOTICE! Damage hazard
Ensure that no cable is pressed in or pinched.
Attach the interior cover to the heat exchanger unit.
3. Fasten the interior cover to the heat exchanger unit with the 4 bolts supplied with the fixing kit. Tighten the bolts
using a torque spanner and a fastening torque of max. 1.2 Nm.
Installing the LED light strip (optional)
Fix the LED light strips to the interior cover.
Fig.  on page 6
Electrical connection
1. Connect the plugs to the sockets.
Fig.  on page 6
Item Socket
1
2
Fig.  on page 6
Description
C1 Input power supply from vehicle battery
C6 Output LED light strip (optional)
Spacer length required (h)
26 mm
28 mm
30 mm
32 mm
34 mm
36 mm
38 mm
EN
17