Preparations; Installation; Attaching The Stand - Samsung S24AG300NE User Manual

Chapter 02

Preparations

Installation

Installation Installation
A A A ttaching the Stand
ttaching the Stand ttaching the Stand
1
Put the stand base onto the stand neck as
the direction shown in the figure. Check
that the stand neck is firmly connected.
3
Push the assembled stand into the main body in the direction of the arrow as
shown in the figure.
2
Tightly fasten the connecting
screw at the bottom of the
stand base.
4
5 6
Disassemble the decoration cover. Attach the decoration cover in the direction of
the arrow and turn it in clockwise according to the mark.
7 8
Stand up the monitor as After installing the stand,
shown in the figure. place the product upright.
Caution
Do not arbitrarily remove the panel film.
If not observed, the warranty service may
be restricted.
9