Connecting The Power; Tidying Up The Connected Cables - Samsung S24AG300NE User Manual

Connecting the Power

HDMI IN DP IN
DC 19V
1
Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 19V port
on the back of the product.
2
Next, connect the power cable to the power outlet.
3
Press the JOG button at the bottom of the product to turn it on.
― The input voltage is switched automatically.

Tidying Up the Connected Cables

1
Connect the corresponding cables.
3
Put both cables in the cable holder on the
stand (HOLDER-STAND CABLE) to organise
the cables, as shown in the figure.
Assembly is complete.
2
Pull the right side of the HOLDER-STAND
CABLE to remove from the stand. The left side
of the HOLDER-STAND CABLE can be damaged
when pulled forcibly.
17