Pc Settings Menu - Sony BRAVIA KLV-32S550AE Operating Instructions Manual

Timer Settings
Product Information
Factory Settings

PC Settings menu

Wide Mode
Reset
Auto Adjustment
Phase
Pitch
Horizontal Shift
20
GB
Colour System
Selects the colour system ("Auto", "PAL", "SECAM", "NTSC3.58", "NTSC4.43" or
"PAL60") according to the composite video signal from the input source.
Sets the timer to turn on/off the TV.
Sleep Timer
Sets the TV to automatically switch to standby mode after a certain amount of time.
z • If you turn off the TV and turn it on again, "Sleep Timer" is reset to "Off".
• A notification message appears on the screen one minute before the TV switches to standby
mode.
Wake Up Timer
Sets the desired period of time to turn on the TV from standby mode.
"Time": Sets the desired period of time to turn on the TV.
"Duration": Sets how long you want the TV to stay on before switching to standby
mode again.
• When the "Sleep Timer" or "Wake Up Timer" is activated, the
TV front panel lights up in amber.
Displays your TV's product information.
Resets all settings to factory settings other than "Programme Block", programme preset
data and the FM Radio preset data. After completing this process, the initial set-up
screen is displayed the next time you turn on the TV. Completing auto tuning
in initial set-up will reset these settings. To keep them, select "Cancel" in the auto tuning
confirmation dialogue.
• Be sure not to turn the TV off during this period (it takes about 30 seconds) or press any
buttons.
Selects a screen mode for displaying input from your PC, see page 10.
"Normal": Displays the picture in its original size.
"Full 1": Enlarges the picture to fill the display area, keeping its original horizontal-to-
vertical aspect ratio.
"Full 2": Enlarges the picture to fill the display area.
Resets all the "PC Settings" except "Wide Mode" to the factory settings.
Automatically adjusts the display position and phase of the picture when the TV
receives an input signal from the connected PC.
z • "Auto Adjustment" may not work well with certain input signals. In such cases, manually
adjust "Phase" and "Horizontal Shift".
Adjusts the phase when the screen flickers.
Adjusts the pitch when the picture has unwanted vertical stripes.
Adjusts the horizontal position of the picture.
(Timer) indicator on the