Sound Menu - Sony BRAVIA KLV-32S550AE Operating Instructions Manual

Sound menu

Sound Mode
Reset
5 Band Equalizer
Balance
Intelligent Volume
Volume Offset
Surround
Dual Sound
18
GB
"Dynamic": Enhances treble and bass. Recommended for home entertainment.
"Standard": For standard sound.
"Clear Voice": Makes voice sound clearer.
Resets all the "Sound" settings except "Sound Mode" and "Dual Sound" to the factory
settings.
Adjusts sound frequency settings.
1
Make sure that "Adjust" is selected, then press
Selecting "Reset" will set your TV to the factory settings.
2
Press G/g to select the desired sound frequency, then press F/f to adjust the setting and
press . The adjusted settings will be received when you select "Sound Mode" options.
• Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency
will affect lower pitched sound.
Emphasises left or right speaker balance.
Minimizes the difference in volume level between all programmes and adverts (e.g.
adverts tend to be louder than programmes).
Adjusts the volume level of the current input relative to other inputs.
Choose either "On" (surround), "Simulated Stereo" (stereo-like monaural sound) or "Off".
Selects the sound from the speaker for a stereo or bilingual broadcast.
The selection varies, depending on the Broadcasting.
Broadcasting
NICAM stereo
NICAM bilingual
NICAM monaural
A2 (German) stereo
A2 (German) bilingual
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM programme, select "Mono". The
sound becomes monaural, but the noise is reduced.
• The "Dual Sound" setting is memorised for each programme position.
• You cannot receive a stereo broadcast signal when "Mono" is selected for the programme
position.
z • If you select other equipment connected to the TV, set "Dual Sound" to "Stereo", "Main"
or "Sub". However, when the external equipment connected to the HDMI jack is selected,
this is fixed to "Stereo".
• If you access to FM Radio mode, set "Dual Sound" to "Stereo" or "Mono".
Selection
Stereo (stereo sound)/Mono (regular sound)
Main (main sound)/Sub (sub sound)/Mono (regular sound)
Main (main sound)/Mono (regular sound)
Stereo (stereo sound)/Mono (regular sound)
Main (main sound)/Sub (sub sound)
.