Additional Information; Using A Usb Ac Adaptor - Sony ICD-SX813 Operating Instructions Manual

Additional Information

Using a USB AC Adaptor

To the
connector
USB connecting
cable (supplied)
You can charge the rechargeable batteries
by connecting the IC recorder to an AC
outlet using a USB AC adaptor
AC-NWUM50 (not supplied). You can
charge the batteries while you are using the
IC recorder, so that it is useful when you
want to record for a long time.
When you use the IC recorder for the first
time, or after you have not used the IC
recorder for a certain period of time, charge
126 GB
(USB)
the batteries continuously until "
displayed.
It takes about 4 hours to fully charge
exhausted batteries.*
1
Connect a USB AC adaptor (not
supplied) to an AC outlet.
2
Connect the USB AC adaptor to the
supplied USB connecting cable.
3
Connect the USB connecting cable to the
(USB) connector of the IC recorder.
While the batteries are charging, the
battery indicator is displayed in an
animation.
Now you can use the IC recorder while
charging the batteries.
Battery indicator
* This is an approximation for the time it takes
to charge from no remaining battery power
to full battery power at room temperature. It
varies depending on the remaining power
" is