Additional Information; Using The Setup Menu - Sony RCD-W222ES Primary Operating Instructions Manual

Additional Information

Using the Setup Menu

You can make various settings on this unit by
using the Setup Menu.
When using the remote, set SELECT to CDR.
1
Press MENU/NO.
2
Turn AMS (or press ./> on the
remote) to select the setup item, and
press AMS (or YES).
3
Turn AMS (or press ./> on the
remote) to set the item, and press AMS
(or YES).
4
Press MENU/NO.
To initialize an item's parameter
Press CLEAR after Step 2.
Notes
• The menus you can use while the unit is stopped,
playing, or recording differ.
• The setting is stored in memory even if you turn off
the unit or disconnect the power.
Menu items
Setup item
Track Mark
LSync Lvl
Silent Pause
Direct
Text Save
Post Gap
DECK A Lvl
Optical Lvl
Coaxial Lvl
28
Function (reference page)
Sets the Track Marking Function (page 22).
Changes the trigger level for Track Marking Function (page
22).
Sets the Silent Pause Function (page 17).
Sets the Direct Recording Function (page 23).
Records the CD text automatically at Make-Disc Synchro-
Recording (page 18).
Sets the function to add Post Gap. (page 17).
Adjusts the input level from the CD player section (DECK A)
(page 21).
Adjusts the input level from the DIGITAL OPTICAL IN jack
(page 21).
Adjusts the input level from the DIGITAL COAXAL IN jack
(page 21).
MENU/NO
CLEAR
SELECT
MENU/NO
./>
Parameters (Initial setting)
LSync/Off (LSync)
–72 dB to –20 dB in 2 dB
increments (–50 dB)
On/Off (On)
On/Off (Off)
On/Off (On)
On/Off (Off)
– dB to 18.0 dB (0.0 dB)
– dB to 18.0 dB (0.0 dB)
– dB to 18.0 dB (0.0 dB)
YES
AMS
YES
CLEAR