Specification - Marshall Amplification DSL1CR Quick Start Manual

ENGLISH
and used in accordance with the instructions,
may cause harmful interference to radio
communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and the receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
CAUTION: Any changes or modifications not
expressly approved by the party responsible
for compliance could void the users authority to
operate the equipment.
This device complies with CAN ICES-3(B)/NMB-
3(B)
3

SPECIFICATION

From clean to distorted overdrives, the DSL is
a versatile all-valve amp packed with features
including an effects loop, power reduction
switch and digital reverb. Your amp has been
specifically designed to sound great at a range
of volumes. Perfect for you to use at home, in
rehearsals and studios, or on stage.
MODEL: DSL1CR
1W
(with power
Power
reduction
option to 0.1W)
2 x ECC83 and
Valves
1 x ECC82
2 (split) "ultra gain" and
Channels
Volume control, channel
select switch, tone shift
Equalisation
switch, treble, middle, bass,
reverb and power reduction
Effects
1 x 1/4" jack speaker output,
Outputs
16Ω load only, 1 x 3.5mm jack
Effects loops
Yes, series, send/return
1 x 8"
Celestion G8C-
Speakers
15"Eight-15"
(15w, 16Ω)
Unit weight
7.9kg
Unit width
360mm
Unit height
340mm
Unit depth
215mm
DSL1HR
1W (with
power
reduction
to 0.1W)
2 x ECC83
and 1 x
ECC82
"classic gain"
option
Digital reverb
emulated line out
N/A
5.6kg
360mm
210mm
215mm