Table of Contents
Advertisement
Setup Mode
You can change washer vend price, cycle time, and cycle parameters, etc.
Entering set up mode
- Coin type – Turn on/off toggle switch.
- Card type – Insert the service card.
- OPL type – 1) Push the Hot & Cold button at the same time.
2) Push the Warm button 3 times.
- Then, the washer displays
1. how to change regular price.
Entering set up mode.
You will see LqC1
Press the Hot button.
Press the Warm or the Cold button until
Press the Start button.
Press the Start button.
Display previous regular price.
Press Warm(+) or Cold(-) button to set the regular price.
(The vend price can be set from 0 to 9.95 in 5¢ increments.)
Press the Start button.
The machine sets up the regular price, then advances to the next process
automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready mode.
(display)
.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• OPL type/Coin type - Push the Hot button twice
PROGRAMMING MODE - SETUP MODE
Button
appears in the display.
25
Display
Advertisement
Table of Contents
