NEC NP-PA550W User Manual page 58

• NETWORK SERVICE
PJLink PASSWORD
HTTP PASSWORD
AMX BEACON
NOTE: If you forget your password, contact your dealer.
*What is PJLink?
PJLink is a standardization of protocol used for controlling projectors of different manufacturers.This standard proto-
col is established by Japan Business Machine and Information System Industries Association (JBMIA) in 2005.
The projector supports all the commands of PJLink Class 1.
Setting of PJLink will not be affected even when [RESET] is done from the menu.
• CRESTRON
DISABLE
ENABLE
IP ADDRESS
IP ID
• INFORMATION
WIRED LAN
WIRELESS LAN
UPDATE
Set a password for PJLink*. A password must be 32 characters or less. Do not forget
your password. However, if you forget your password, consult with your dealer.
Set a password for HTTP server. A password must be 10 characters or less.
Turn on or off for detection from AMX Device Discovery when connecting to the network
supported by AMX's NetLinx control system.
TIP:
When using a device that supports AMX Device Discovery, all AMX NetLinx control system will rec-
ognize the device and download the appropriate Device Discovery Module from an AMX server.
Placing a checkmark will enable detecting the projector from AMX Device Discovery.
Clearing a checkmark will disable detecting the projector from AMX Device Discovery.
Disables Crestron Control™.
Enables Crestron Control.
Set your IP address of Crestron server.
Set your IP ID of Crestron server.
Display a list of settings of wired LAN connection.
Display a list of settings of wireless LAN connection.
Reflect settings when they are changed.
46
3. Convenient Features