Part Names Of The Projector; Front/Top - NEC NP-PA550W User Manual

 Part Names of the Projector

Front/Top

The lens is sold separately. The description below is for when the NP13ZL lens is mounted.
Lens Shift Dial (vertical/horizontal)
(→ page 18)
Zoom Lever/Zoom Ring (→ page 21)
Remote Sensor
(→ page 9)
Ventilation (outlet)
Heated air is exhausted from here.
Lamp Cover (→ page 160)
Control Panel
(→ page 6)
Security Bar
Attach an anti-theft device.
The security bar accepts security
wires or chains up to 0.18 inch/4.6
mm in diameter.
Adjustable Tilt Foot
(→ page 21)
Monaural Speaker (10 W)
Mounting the straps
1. Mount the straps to the filter cover and lamp cover as shown on the diagram below.
2. Insert the knot in the strap into the hole on the bottom of the projector and pull in the direction of the arrow
to fasten.
1 2
Lamp cover strap insertion hole
4
1. Introduction
Indicator Section
(→ page 6)
Remote Sensor (located on the
front and the rear)
(→ page 9)
Adjustable Tilt Foot
(→ page 21)
Lens Cap
(The optional lens is shipped with
the lens cap.)
Lens
Focus Ring
(→ page 19)
Lens Release Button
(→ page 142)
Filter cover strap insertion hole