Connecting To A Wireless Lan (Sold Separately); Mounting A Wireless Lan Unit - NEC NP-PA550W User Manual

Connecting to a Wireless LAN (sold separately)

The separately sold wireless LAN unit allows you to use a wireless LAN environment. When using the projector in a
wireless LAN environment, the IP address and other settings must be made on the projector.
Important:
• If you use the projector with the USB Wireless LAN Unit in the area where the use of wireless LAN equipment is
prohibited, remove the USB Wireless LAN Unit from the projector.
• Buy the appropriate USB Wireless LAN Unit for your country or area.
NOTE:
• The green LED on the USB Wireless LAN Unit flashes to show that the USB Wireless LAN Unit is working.
• Your computer's wireless LAN adapter (or unit) must be complied with Wi-Fi (IEEE802.11b/g/n) standard.
Flow of Setting Wireless LAN
Step 1:
Attach the USB Wireless LAN Unit to the projector if required.
Step 2:
Display [NETWORK SETTINGS] from [APPLICATION MENU]. (→ page 120)
Step 3:
Select [NETWORK SETTINGS] → [WIRELESS LAN] → [PROFILES] and set [EASY CONNECTION],
[PROFILE 1], or [PROFILE 2]. (→ page 121)
TIP:
Access the HTTP server function to set [NETWORK SETTINGS] → [SETTINGS] → [WIRELESS] → [EASY CONNECTION] , [PRO-
FILE1], [PROFILE2].

Mounting a wireless LAN unit

CAUTION:
• The wireless LAN unit is mounted inside the projector. Before mounting it, turn off the power, unplug the power
cord and let the projector cool down completely. Removing the filter unit while the projector is running could result
in burns or electric shocks from touching internal parts.
NOTE:
• The wireless LAN unit has a front and a back and must be mounted in the wireless LAN port in a specific direction. The port is
designed so that the unit cannot be mounted in the opposite direction, but trying to push it in by force could damage the wireless
LAN unit port.
• To prevent damage due to static electricity, touch a nearby metal object (a door knob, aluminum sash, etc.) before touching the
wireless LAN unit to eliminate the static electricity from your body.
• Disconnect the power cord when mounting and removing the wireless LAN unit.
Mounting and removing the wireless LAN unit while the projector's power is on could damage the wireless LAN unit or result in
malfunction on the projector. If the projector should malfunction, turn off the projector's power, unplug the power cord, then plug
the power cord back in.
• Do not connect any USB device other than the wireless LAN unit to the USB (LAN) port. Also, do not connect the wireless LAN
unit to the USB port in the connector section.
6. Installation and Connections
151