Table of Contents
Advertisement
6.3
R
VGABIOS
UN
Choosing Enabled will make BIOS run VGA BIOS to initialize the VGA
card when system wakes up from S3 state. The system time is shortened
if you disable the function, but system will need AGP driver to initialize the
card. So, if the AGP driver of the VGA card does not support the
initialization feature, the display may work abnormally or not function after
S3.
The Choices:
Auto (default), Yes, No.
6.3
P
M
OWER
ANAGEMENT
This category allows you to select the type (or degree) of power saving
and is directly related to the following modes:
1.
HDD Power Down.
2.
Doze Mode.
3.
Suspend Mode.
There are four options of Power Management, three of which have fixed
mode settings
Min. Saving
Minimum power management.
Doze Mode = 1 hr.
Standby Mode = 1 hr
Suspend Mode = 1 hr.
HDD Power Down = 15 min
Max Saving
Maximum power management only available for sl CPU's.
Doze Mode = 1 min
Standby Mode = 1 min.
Suspend Mode = 1 min.
HDD Power Down = 1 min.
User Defined (default)
Allow you to set each mode individually.
When not disabled, each of the ranges is from 1 min. to 1 hr. except
for HDD Power Down which ranges from 1 min. to 15 min. and
disable.
I86PE-A4 BIOS Setup
S3 R
IF
ESUME
24
Advertisement
Chapters
Table of Contents
