Biostar I86PE-A4 Setup Manual page 62

3.11 T D
YPEMATIC
Sets the delay time after the key is held down before it begins to repeat
the keystroke.
The Choices:
250 (default), 500,750,1000.
3.12 S O
ECURITY PTION
This option will enable only individuals with passwords to bring the system
online and/or to use the CMOS Setup Utility.
System
Setup (default)
This will only apply if passwords are set from the Setup main menu.
3.13 APIC M
ODE
Selecting Enabled enables ACPI device mode reporting from the BIOS to
the operating system.
The Choices:
Enabled (default), Disabled.
3.14 MPS V
ERSION
The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor
specification.
Select version supported by the operation system running on this
computer.
The Choices:
1.4 (default), 1.1.
3.15 OS S F
ELECT
A choice other than Non-OS2 is only used for OS2 systems with memory
exceeding 64MB.
The Choices:
Non-OS2 (default), OS2.
3.16 S S
UMMARY CREEN
This item allows you to enable/disable the summary screen. Summary
screen means system configuration and PCI device listing.
The choices:
Enabled, Disabled (default).
I86PE-A4 BIOS Setup
(M )
ELAY SEC
A password is required for the system to boot
and is also required to access the Setup Utility.
A password is required to access the Setup
Utility only.
C F OS
ONTROL OR
DRAM > 64MB
OR
S
HOW
12