Biostar TA770E3 Setup Manual page 27

Manual Overclock System (M.O.S.)
MOS is designed for experienced overclock users.
It allows users to customize personal overclock settings.
Main Advanced
T-Series Settings
WARNING: Please Clear CMOS if system no display
after overclocking.
OverClock Navigator
=========== Automate OverClock System ===========
Auto OverClock System
============ Manual OverClock System ============
> Over-Voltage Configuration
CPU Frequency
> CPU FID/VID Control
> DRAM Timing Configuation
> Hyper Transport Configuration
> Memory Configuration
> G.P.U Phase Control
Integrated Memory Test
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Main Advanced
T-Series Settings
WARNING: Please Clear CMOS if system no display
after overclocking.
OverClock Navigator
=========== Automate OverClock System ===========
Auto OverClock System
============ Manual OverClock System ============
> Over-Voltage Configuration
CPU Frequency
> CPU FID/VID Control
> DRAM Timing Configuation
> Hyper Transport Configuration
> Memory Configuration
> G.P.U Phase Control
Integrated Memory Test
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Over-Voltage Configuration
Enter this function for more advanced voltage settings.
CPU Frequency
CPU Frequency is directly in proportion to system performance. To
maintain the system stability, CPU voltage needs to be increased also
when raising CPU frequency.
CPU FID/VID Control
Enter this function for more advanced CPU settings.
DRAM Timing Configuration
Enter this function for more advanced DRAM clock settings.
TA770E3/TA770XE3/TA790XE3
BIOS SETUP UTILITY
PCIPnP Boot
Chipset
[Normal]
[V6-Tech Engine]
Options
Normal
Automate OverClock
Manual OverClock
[200]
[Disabled]
↓
BIOS SETUP UTILITY
PCIPnP Boot Chipset
[Manual OverClock]
[V6-Tech Engine]
[200]
[Disabled]
T-Series Exit
Options
Normal
Automate OverClock
Manual OverClock
Select Screen
Select Item
Change Option
+-
F1 General Help
F10 Save and Exit
ESC Exit
T-Series Exit
Options
Normal
Automate OverClock
Manual OverClock
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
Exit
ESC
25