Biostar Hi-Fi B150Z5 Manual page 16

JFRONT_USB3_1: Header for USB 3.0 Ports at Front Panel
This header allows user to add additional USB ports on the PC front panel, and also can be
connected with a wide range of external peripherals.
Note
» This connector supports Biostar Charger Booster II technology which boosts the charging time of
your USB-powered devices.
» The charging mode can be selected in BIOS setup menu or Charger Booster II program.
F_USB1/2: Header for USB 2.0 Ports at Front Panel
This header allows user to add additional USB ports on the PC front panel, and also can be
connected with a wide range of external peripherals.
JSPDIFOUT1: Digital Audio-out Connector
The connector is for connecting the S/PDIF output bracket.
16 | Chapter 2: Hardware installation
Pin Assignment Pin
1 VBUS0 11
2 SSRX1- 12
3 SSRX1+ 13
4 Ground 14
5 SSTX1- 15
6 SSTX1+ 16
7 Ground 17
8 D1- 18
9 D1+ 19
10 ID 20
Pin Assignment
1 +5V (fused)
2 +5V (fused)
3 USB-
4 USB-
5 USB+
6 USB+
7 Ground
8 Ground
9 Key
10 NC
Pin Assignment
1 +5V
2 SPDIF_OUT
3 Ground
Assignment
D2+
D2-
Ground
SSTX2+
SSTX2-
Ground
SSRX2+
SSRX2-
VBUS1
Key