Biostar Hi-Fi B150Z5 Manual page 11

Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot
such that the notch on the DIMM matches the break on the slot.
Step 2: Insert the DIMM vertically and firmly into the slot until the retaining clips snap back in
place and the DIMM is properly seated.
Note
» If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
» The motherboard will be damaged when you install DDR3L and DDR4 memory modules at same
time.
Memory Capacity
DIMM Socket Location
DDR3_A1
DDR3_B1
DIMM Socket Location
DDR4_A1
DDR4_B1
Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status
Enabled
Enabled
(O means memory installed, X means memory not installed.)
Note
» When installing more than one memory module, we recommend to use the same brand and
capacity memory on this motherboard.
DDR3L Module Total Memory Size
4GB/8GB
Max is 16GB.
4GB/8GB
DDR4 Module Total Memory Size
4GB/8GB/16GB
Max is 32GB.
4GB/8GB/16GB
DDR3_A1 DDR3_B1
O O
X X
Hi-Fi Z170Z5 / Hi-Fi B150Z5
DDR4_A1 DDR4_B1
X X
O O
Chapter 2: Hardware installation | 11