6 Customizing
This. section. describes. the. various. setting.
option.of.this.Blu-ray.Disc
If.the.setup.option.is.greyed.out,.it.means.
the. setting. cannot. be. changed. at. the.
current.state.
General Setting
1..Press.SETUP.button.on.the.remote.
control.The.Setup.Menu.appears.
System
Language
Playback
Security
Network
Move cursor key to select menu option
then use "OK" key to select
2. Press to.select.an.option,.then.press
.to.access.
3. Press / to.select.a.setup.option.and
press ..
4. Select.the.setting.you.wish.to.change
and press OK to confirm.
- Press to.return.to.the.previous.menu.
[System]
To.change.the.following.system.option.
to.personalize.your.Blu-ray.Disc
• [Screen Saver]
Turn.On.or.Off.the.screen.saver.mode.
It.helps.to.protect.the.TV.screen.
{.On.}.–.Set.the.screen.saver.active.
after.approximately.5.minutes.with.no.
operation.
-.The.Blu-ray.Disc
standby.mode.if.there.is.no.operation.
after.the.screen.saver.is.engaged.for.
approximately.15.minutes.
{.Off.}.–.Turn.off.the.screen.saver.
mode..
• [Disc Auto Playback]
Turn.On.or.Off.the.disc.automatic.
playback.switching.mode.
{On}.–.The.disc.playback.automatically.
after.loading.
{Off}.–.Turn.off.disc.auto.playback.
mode.
• [CEC]
This.player.supports.REGZA-LINK.which.
uses.the.HDMI.CEC.(Consumer.
Electronics.Control).protocol..You.can.
1
.player..
TM
General Setting
Screen Saver
On
Disc Auto Playback
On
CEC
On
Load Default
More...
Upgrade
More...
Exit
SETUP
..player.
TM
.player.will.switch.to.
TM
use.one.single.remote.control.to.control.
all.REGZA-LINK-compliant.devices.that.
are.connected.through.HDMI.connectors.
{On}.-.Turns.on.REGZA-LINK.features.
-With.CEC.on,.during.TV.standby.with.
the.Blu-ray.Disc
.player.on,.pressing.
TM
SETUP,.PLAY/PAUSE.will..power.on.the.
TV..When.you.turn.the.TV.off,.this.unit.
will.automatically.turn.off.
{Off}.-.Disables.REGZA-LINK.features.
• [Load Default]
Reset.all.settings.of.Blu-ray.Disc
to.initial.default.state.
-.Follow.the.instruction.on.the.TV.screen.
to confirm the default setting operation.
1..Select.Load Default.
2..A.dialogue.box.pops.up.shown.as.
below..Select.OK.
Load Default
Do you want to load default?
3.It.may.take.awhile.when.loading.
default.is.in.progress..Please.wait...
Load Default
Loading default, please wait...
30%
4..TV.will.display.as.follow:
Welcome
to the Toshiba Blu-ray Disc Player Setting
Wizard.
Some simple settings are suggested before you
begin. You can also access detailed settings
from the Setup Menu.
5. Press OK, enter language setting.
..Press.OK,.enter.language.setting..
Press/ to.select.a.language.option.
Choose
an OSD language before starting.
The language selected will be applied not only
here but also in other OSD windows, menus etc.
Previous
.player.
TM
Cancel
OK
Next
OK
English
Next
OK