Epson UB-E500 User Manual

UB-E500/S500/U500 User's Manual
Introduction
The UB-E500, UB-S500, and UB-U500 are dedicated interface boards for Epson
TM-L500 series printers.
This manual provides instructions, including a simple setup for operators to
use the interface boards safely and correctly.
Important Safety Information
Key to Symbols
The symbols in this manual are identified by their level of importance, as
defined below. Read the following carefully before handling the product.
CAUTION:
Cautions must be observed to avoid minor injury to yourself, damage to
your equipment, or loss of data.
Note:
Notes have important information and useful tips on the operation of your equipment.
Safety Precautions
CAUTION:
Do not install the UB-E500/S500/U500 into other printers than the Epson
TM-L500 series. Otherwise, the printers may not work properly.
Be sure to make the printer setting appropriately for each interface.
Wear a grounded wrist strap when handling the interface board to
prevent damage from static electricity.
To avoid contamination, do not touch the board connector.
For the UB-E500, when LAN cables are installed outdoors, make sure
devices without proper surge protection are cushioned by being
connected through devices that do have surge protection. Otherwise,
the devices can be damaged by lightning.
Caution Label
The caution label on the UB-E500 indicates the following precaution.
CAUTION:
Do not connect a telephone line, a display module cable, or a drawer
kick-out cable to the Ethernet connector.
Copyright © Seiko Epson Corporation 2011
1
412141401
Printed in China