Steps
1. Align the screw holes on the front I/O-panel with the screw holes on the front bezel and snap it into place.
2. Route the cables through the routing guides on the front I/O-panel.
3. Replace the four screws (M3x4) that secures the front I/O-panel to the front bezel.
Next steps
1. Install the
front
bezel.
2. Install the
right-side
cover.
3. Install the
left-side
cover.
4. Install the
top
cover.
5. Follow the procedure in
Front-chassis fan
Removing the front-chassis fan
Prerequisites
1. Follow the procedure in
2. Remove the
left-side
cover.
3. Remove the
single-graphics
About this task
The following images indicate the location of the front-chassis fan and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
card.
computer.
computer.
77