Table of Contents
Advertisement
NOTE: Note the orientation on the hard-drive carrier to replace it correctly.
Steps
1. Align the hard drive with the pins on the hard-drive carrier.
2. Using the tabs on the opposite side, flex open the carrier to insert the pins on the other side.
3. Slide the hard-drive assembly into the hard-drive cage until it snaps into place.
4. Connect the data cable and power cable to the hard drive.
Next steps
1. Install the
left-side
cover.
2. Follow the procedure in
3. Verify if the storage device is installed correctly (optional):
● If you are replacing a storage device which does not have the operating system installed, follow the steps in
storage device in device
● If you are replacing a storage device that had the operating system installed, follow the steps in
device in system setup
NOTE: To install the operating system on to your storage device, see Reinstall Windows 10 to the Dell factory image
using recovery media in the knowledge base article 000176966.
After working inside your
manager.
(BIOS).
computer.
Identifying
Identifying your storage
23
Advertisement
Table of Contents
