Troubleshooting - Hardware; Pc Hangs During Boot Up - HighPoint RocketRAID 4520 Series User Manual

4. Reboot your computer into DOS mode by:
•
Setting boot priority to the bootable USB
•
Removing all bootable drives (OS, CD Drives) from motherboard and leaving
only the bootable USB and RocketRAID card plugged in
5. Once in DOS mode, you should see a command line interface
Bootable USB formatted with Rufus Utility, FreeDOS CLI (Command Line Interface)
6. Type in the command with the file you found in the README (ex. run go.bat on
command line)
7. Reboot
Troubleshooting – Hardware
If you face any hardware related issues involving the RocketRAID 4522 or disk drives,
refer to the following sections for troubleshooting tips. For all other problems, submit
a support ticket at www.highpoint-tech.com/websupport.

PC hangs during Boot Up

The most commons symptom for this problem is the lack of resources.
There are two methods to fix this problem:
1. Update your motherboard BIOS
2. Update your RAID Controller BIOS
45