Utilizing The Health Inspector Scheduler - HighPoint RocketRAID 4520 Series User Manual

3. Click SMART on desired disk.
4. Click Disable.
Note: Disabling SMART will prompt the Storage Health Inspector to change the disk
status to 'Failed'. The RocketRAID alarm will not alert you when this setting is
disabled. Any potential warnings related to S.M.A.R.T attribute technology will not
trigger.
Changing HDD Temperature Threshold
To ensure hard disk temperatures remain cool, enable SMART to monitor disk
temperatures. In SHI, you can set a threshold so that the WebGUI or controller alarm (if
enabled) can warn you when physical disks get too hot.
1. Log in to WebGUI.
2. Select the controller from the drop down on the top left.
3. Click SHI.
4. Type the desired hard disk temperature threshold (°��).
5. Click Set.

Utilizing the Health Inspector Scheduler

The Health Inspector Scheduler (HIS) enables you to periodically check your
disk/arrays to ensure they are functioning optimally.
41