Troubleshooting; Electrical Equipment Waste Disposal; Disposal Of Packing Material - KitchenAid 5KSM7990 Product Manual

Professional bowl-lift stand mixer
Hide thumbs Also See for 5KSM7990:
Table of Contents

Advertisement

TROUBLESHOOTING

Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
PROBLEM
If Stand Mixer warms up
during use:
If the Stand Mixer emit a
pungent odour:
If the Stainless Steel Flat
Beater hits the Bowl:
If your Stand Mixer should
fail to operate, please
check the following:
If the problem cannot be
corrected:

ELECTRICAL EQUIPMENT WASTE DISPOSAL

DISPOSAL OF PACKING MATERIAL

The packing material is recyclable and is marked with the recycle symbol
of the packing must therefore be disposed of responsibly and in full compliance with local
authority regulations governing waste disposal.
WARNING
Electrical Shock Hazard
Under heavy loads with extended mixing time periods, you
may not be able to comfortably touch the top of the unit. This is
normal.
This is common with Electric Motors, especially when new.
Stop the Stand Mixer. See the "Product Usage" section and
adjust the Beater to Bowl Clearance.
Is the Stand Mixer plugged in?
Is the fuse in the circuit to the Stand Mixer in working order? If
you have a circuit breaker box, be sure the circuit is closed.
Turn off (0) the Stand Mixer for 10-15 seconds, then turn it
back on. If the Stand Mixer still does not start, allow it to cool
for 30 minutes before turning it back on.
See the "Terms of KitchenAid Guarantee ("Guarantee")"
section.
Do not return the Stand Mixer to the retailer; retailers do not
provide service.
SOLUTION
. The various parts
15

Advertisement

Table of Contents
loading

Table of Contents