USB1 3.1 port enable
Press [Enter] to configure USB1 3.1 port enable options.
USB1 3.1 port 0
Allows you to enable or disable USB1 3.1 port 0.
USB1 3.1 port 1
Allows you to enable or disable USB1 3.1 port 1.
FCH Spread Spectrum
Allows you to select whether or not enable the Spread Spectrm Feature.
SMU Common Options
Press [Enter] to configure SMU Common Options.
TDP Control
[Auto] Select this item to use the default sustained power limit.
[Manual] Select this item to set customized sustained power limit.
PPT Control
[Auto] Select this item to use the default PPT Limits.
[Manual] Select this item to set customized PPT Limits.
Thermal Control
[Auto] Select this item to use the default TctlMax.
[Manual] Select this item to set customized TctlMax.
TDC Control
[Auto] Select this item to use the default TDC limits.
[Manual] Select this item to set customized TDC limits.
EDC Control
[Auto] Select this item to use the default EDC limits.
[Manual] Select this item to set customized EDC limits.
PROCHOT Control
[Auto] Select this item to use the default PROCHOT deassertion ramp time.
[Manual] Select this item to set customized PROCHOT deassertion ramp time.
VDDP Voltage Control
[Auto] Select this item to use the default VDDP voltage.
[Manual] Select this item to set customized VDDP voltage.
Infinity Fabric Frequency and Dividers
Allows you to set Infinity Fabric Frequency and Dividers.
[Auto] BIOS will configure this setting automatically.
60