Electrical Connection; Sorting The Laundry; Preparing Laundry For Washing - Beko WTA 10712 XSWR User Manual

1 Loosen the lock nuts on the feet by hand.
2 Adjust the feet until the product stands in a
stable and balanced way.
3. Tighten all lock nuts by hand again.

4.1.7 Electrical connection

Connect the product to a grounded outlet
protected by a 16 A fuse. Our company shall
not be liable for any damages that will arise
when the product is used without grounding in
accordance with the local regulations.
• Connection must comply with national regulations.
• The wiring for the electrical outlet circuit
must be sufficient to meet the appliance
requirements. Use of a Groud Fault Circuit
Interrupter (GFCI) is recommended.
• Power cable plug must be within easy reach
after installation.
• If the current value of the fuse or breaker
in the house is less than 16 Amps, have a
qualified electrician install a 16 Amp fuse.
• The voltage specified in the "Technical
specifications" section must be equal to
your mains voltage.
• Do not make connections via extension
cables or multi-plugs.
A
CAUTION!
• Damaged power cables must be replaced
by the Authorised Service Agents.
4.1.8 Initial use
8 / EN
Before starting to
use the product
make sure that
the preparations
are made which
are in line with the
"Important Safety
and Environment Instructions" and the
instructions in the "Installation" section.
To prepare the product for washing laundry,
perform first operation in Drum Cleaning
programme. If this program is not available
in your machine, apply the method which is
described in the section 4.4.2.
C
INFORMATION
• Use an anti-limescale suitable for the
washing machines.
• Some water might have remained in
the product due to the quality control
processes in the production. It is not
harmful for the product.
4.2 Preparation

4.2.1 Sorting the laundry

• Sort laundry according to type of fabric,
colour, and degree of soiling and allowable
water temperature.
• Always observe the instructions given on
the garment care labels.

4.2.2 Preparing laundry for washing

• Laundry items with metal attachments
such as, underwiring, belt buckles or metal
buttons will damage the product. Remove
the metal pieces or wash such clothes by
putting them in a laundry bag or pillow case.
• Take out all substances in the pockets such
as coins, pens and paper clips, and turn
pockets inside out and brush. Such objects
may damage the product or cause noise
problem.
• Put small size clothes such as infant's socks
and nylon stockings in a laundry bag or
pillow case.
• Place curtains in without compressing them.
Remove curtain attachment items.
• Fasten zippers, sew loose buttons and
mend rips and tears.
• Wash "Machine washable" or "Hand
washable" labelled products only with an
appropriate programme.
• Do not wash colours and whites together.
New, dark coloured cottons release a lot of
dye. Wash them separately.
• Tough stains must be treated properly
before washing.
Washing Machine / User Manual