Electrical Connection - Beko WMB 912421 DLC User Manual

Installation
1. Loosen the lock nuts on the feet by hand.
2. Adjust the feet until the product stands level and
balanced.
3. Tighten all lock nuts again by hand.
WARNING:
A
loosen the lock nuts. Otherwise, they will
get damaged.

3.7 Electrical connection

Connect the product to a grounded outlet
protected by a 16 A fuse. Our company shall not
be liable for any damages that will arise when the
product is used without grounding in accordance
with the local regulations.
• Connection must comply with national
regulations.
• Power cable plug must be within easy reach
after installation.
• If the current value of the fuse or breaker in the
house is less than 16 Amps, have a qualified
electrician install a 16 Amp fuse.
• The voltage specified in the "Technical
specifications" section must be equal to your
mains voltage.
• Do not make connections via extension cables
or multi-plugs.
WARNING:
B
must be replaced by the Authorized
Service Agents.
12 / 37 EN
Do not use any tools to
Damaged power cables
Transportation of the product
1. Unplug the product before transporting it.
2. Remove water drain and water supply
connections.
3. Drain all water that has remained in the product.
See 7.5
4. Install transportation safety bolts in the reverse
order of removal procedure; see 3.3.
Never move the product without the
C
transportation safety bolts properly fixed
in place!
WARNING:
A
dangerous to children. Keep packaging
materials in a safe place away from reach
of the children.
Packaging materials are
Washing Machine / User's Manual