Carrying The Tv - Sony BRAVIA KDL-32S5100 Reference Book

Getting Started Operating the TV
Getting Started > Installing the TV

Carrying the TV

Some TV models are packaged with a detached Table-Top Stand so you can mount it to a wall right away.
If you are not mounting the TV to a wall, you will need to attach the Table-Top Stand. You will need a
Phillips screwdriver and the supplied screws to complete the task. Look for the instructions attached to the
TV unit.
Be sure to consider the following while setting up your TV:
Carry the TV with an adequate number of people; larger size TVs require two or more people.
Correct hand placement while carrying the TV is very important for safety and to avoid damages.
Ensure your TV has adequate ventilation if it is installed against a wall or in an enclosed area.
For best picture quality, do not expose the screen to direct illumination or sunlight.
Avoid installing the TV in a room with reflective wall and floor materials.
Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may
cause moisture condensation. This may cause the TV to show poor picture and/or poor color.
Should this occur, allow moisture to evaporate completely before powering the TV on.
Be sure to hold the bottom of the panel, and not the transparent part, speaker, or speaker grill
area. Do not compress the panel's speaker grill area.
Do not lift the TV from the bottom center.
Back to Installing the TV
Home | Getting Started | Operating the TV | Using Features | Using the Menus | Other Information | Specifications
Using Features
> Carrying the TV
Copyright © 2009 Sony Electronics Inc. All rights reserved.
Using the Menus Other Information
Next to Preparation for Table-Top Stand
Specifications