Mitsubishi Electric FR-E800 Instruction Manual page 33

Pr.
Pr.
group
Operation mode
79 D000
selection
Terminal 2
125 T022 frequency setting
gain frequency
Terminal 4
126 T042 frequency setting
gain frequency
User group read
160 E440
selection
PM parameter
998 E430
initialization
Automatic
999 E431
parameter setting
*1 Initial value for the FR-E820-0050(0.75K) or lower, FR-E840-0026(0.75K) or lower, FR-E820S-0050(0.75K) or lower, and FR-E810W-
0050(0.75K) or lower.
*2 Initial value for the FR-E860-0017(0.75K).
*3 Initial value for the FR-E820-0080(1.5K) to FR-E820-0175(3.7K), FR-E840-0040(1.5K) to FR-E840-0095(3.7K), and FR-E820S-0080(1.5K) or
higher.
*4 Initial value for the FR-E820-0240(5.5K), FR-E820-0330(7.5K), FR-E840-0120(5.5K), FR-E840-0170(7.5K), FR-E860-0027(1.5K), and FR-E860-
0040(2.2K).
*5 Initial value for the FR-E820-0470(11K) or higher, FR-E840-0230(11K) or higher, and FR-E860-0061(3.7K) or higher.
*6 Initial value for the FR-E820-0175(3.7K) or lower, FR-E840-0095(3.7K) or lower, FR-E860-0061(3.7K) or lower, FR-E820S-0110(2.2K) or lower,
and FR-E810W-0050(0.75K) or lower.
*7 Initial value for the FR-E820-0240(5.5K), FR-E820-0330(7.5K), FR-E840-0120(5.5K), FR-E840-0170(7.5K), and FR-E860-0090(5.5K) or higher.
*8 Initial value for the FR-E820-0470(11K) or higher and FR-E840-0230(11K) or higher.
*9 The initial value for the FR-E820-0050(0.75K) or lower, FR-E840-0026(0.75K) or lower, FR-E860-0017(0.75K), FR-E820S-0050(0.75K) or lower,
and FR-E810W-0050(0.75K) or lower is set to the 85% of the inverter rated current.
*10 Gr.1 and Gr.2 are the parameter initial value groups. (Refer to
32
2. Basic Operation
2.4 Frequently-used parameters (simple mode parameters)
Initial value
Name Increment
Gr.1
1 0
0.01 Hz 60 Hz
0.01 Hz 60 Hz
1 0
1 0
1 9999
*10
Range
Gr.2
Select the start and frequency command
0 to 4, 6, 7
sources.
Change the frequency at the maximum
50 Hz 0 to 590 Hz potentiometer setting (5 V in the initial
setting).
Change the frequency at the maximum
50 Hz 0 to 590 Hz
current input (20 mA in the initial setting).
This function restricts the parameters that are
0, 1, 9999 read by the operation panel and parameter
unit.
0, 3024,
3044, 3124, Select the PM sensorless vector control and
3144, 8009, set the parameters that are required to drive a
8109, 9009, PM motor.
9109
Changes parameter settings as a batch. The
target parameters include communication
10, 12, 20, parameters for the Mitsubishi Electric human
21, 9999 machine interface (GOT) connection and the
parameters for the rated frequency settings of
50/60 Hz.
page 54.)
Application
Refer
to
page
280
45,
400
47,
400
246
123
244