Table of Contents
Advertisement
__ 2. Install the Redundant AC Power using the installation instructions for FC 1904 (Redundant AC
Power for 3952-F05). Return to this procedure once FC 1904 has been completed.
Note: The FC 1904 II has a wiring diagram for the power connections.
Note: All cables should be routed through the cable management arm.
__ 3. Connect the VGA extension cable to the video connector 5 on the TSSC and connect the video
cable from the monitor to the VGA extension cable 14 .
__ 4. Connect the USB extension cable to Port 3 2 on the TSSC and the keyboard/mouse USB cable to
the USB extension cable 13 .
__ 5. Connect the serial adapter cable (not shown) to the USB port 6 on the TSSC and connect the
serial cable to the serial adapter cable.
__ 6. Connect the AOTM 10 , External 11 , and Internal 12 Ethernet connections as shown in
Figure 27 on page 35.
36
FC 2704, 2725, 2748, & 5512
Advertisement
Table of Contents
