Volume (0 ≤ Min ≤ Start ≤ Max ≤ 100); Start Volume; Maximum Volume; Minimum Volume - LG LT340C Z Series Installation Manual

6
Volume (0 ≤ Min ≤ Start ≤ Max ≤ 100)
• Decide to apply volume policy of Start Volume, Maximum Volume and Minimum Volume
as On (Work) or Off (Do Not Work).

Start Volume

This entry sets the start volume level when is power on.
• The level is specified as a number between minimum volume to maximum value.
(Min ≤ Start ≤ Max)
• The default setting is Off (disabled).
• When enabled, if the value is lower then the minimum specified in the minimum volume entry, the minimum volume entry must be used.
• When enabled, if the value is larger then the maximum specified in the maximum volume entry, the maximum volume value must be used.
• Access to a volume in Timer Power On must be fixed to start volume when LG Hotel Mode Setup (On) and Start Volume (Off, 0 ~ 100)
were set simultaneously.

Maximum Volume

This entry sets the Maximum Volume level the set.
• The level is specified as a number between Minimum Volume to 100. (Min ≤ Max ≤ 100)
• If the command volume up to higher than maximum volume is received, that should be ignored.
• The default value is 100.

Minimum Volume

This entry sets the Minimum Volume level the set will produce.
• The level is specified as a number between 0 to Maximum Volume. (0 ≤ Min ≤ Max)
• If the command volume down to lower than minimum volume is received, that should be ignored.
• The default value is 0.

Key Operation

• Manage key usability of Local(Front) Key and Remote Control. When selected to On, following IR Operation and Local Key Operation will be
worked by below.

IR Operation

Decide whether work the LG remote control or not.
• Able to set Normal, Use PWR Only, Block All
• When IR Operation is set to Block All, all normal remote keys don't work. Use PWR Only (Block except power) makes block all remote keys
except power key.
• Although IR Operation value is Use PWR Only or Block All. It can work in service mode. (In-Start, In-Stop, Power-Only, ADJ, Hotel-Mode,
Hotel-Mode-Ready, P-Check, S-check, In-Time, FMode-Init, FMode-Start, FMode-AV, FMode-F1)
• Menu key action to enter the installation menu and key action with special menu(In-Start / EZ-Adjust ...) are still available.
• When IR Operation is set to Normal (Work), all remote keys are available.