Table of Contents

Advertisement

Available languages

Available languages

64
www.electrolux.com
doing the grocery shopping, we suggest
activating the Super Cool function to cool
the products more rapidly and to avoid
warming another food which is already in
the compartment.
To activate this function, press
repeatedly the temperature regulation
button until the Super Cool indicator
appears.
This function stops automatically after a
maximum of 5 hours or when the sensor
reaches the lowest temperature for the
fridge compartment (1-3°C).
You can deactivate the Super Cool
function before its automatic end by
repeating the procedure until the Super
Cool indicator turns off or by selecting a
different temperature of the fridge
compartment.
4.5 Door open alarm
If the fridge door is left open for
approximately 2 minutes, the sound is on
and the alarm indicator flashes.
The alarm stops after closing the door.
4.6 Alarm
In case of cooling issues, power
interruptions or significant temperature
changes inside your appliance, the alarm
indicator lights up red and the sound is
on.
The alarm may light when
you plug the appliance for
the first time.

5. DAILY USE

CAUTION!
This refrigerating appliance
is not suitable for freezing
foodstuffs.
5.1 Removing and installing the
door shelf
To remove the door shelf:
1. Hold the left side of the shelf.
2. Lift the right side of the shelf until it
comes free from the fastener.
Refer to the "Troubleshooting" chapter
for more possible causes of triggering
the alarm, and solutions on how to
deactivate it.
4.7 Standby mode
Activate the Standby mode to switch off
the cooling function and therefore lower
the energy consumption of the appliance.
To activate the Standby mode:
1. Set the temperature for 2°C. Refer to
the "Temperature regulation" section.
2. Press and hold the temperature
regulation button until all temperature
indicators blink 3 times.
If you press the temperature
regulation button while the
Standby mode is on, all
temperature indicators blink
3 times.
You can deactivate the Standby mode by
repeating the above procedure.
During the Standby mode,
the temperature inside the
appliance may rise above
the set 2°C. If that happens
after the mode deactivates,
the alarm indicator lights and
the sound is on. When the
appliance automatically
lowers the temperature, the
alarm indicator and the
sound alarm deactivate.
3. Lift the left side of the shelf and
remove it.

Advertisement

Table of Contents
loading

Table of Contents