The links below will work in most PDF viewers and link to the topic area by clicking the
link. We recommend Adobe Reader version 10 or greater available at:
http://get.adobe.com/reader
602-249v2 FAQS ..................................................................................................................... 1
USB Power Cord ...................................................................................................................... 1
Clock Factory Restart ............................................................................................................. 1
Clock ......................................................................................................................................... 2
Power Requirements ............................................................................................................... 2
12/24-Hour Time Format ........................................................................................................ 2
Backlight HI-LO-OFF ............................................................................................................... 2
Backlight Auto Dim ................................................................................................................. 2
Set Time Alarm ....................................................................................................................... 3
Snooze .................................................................................................................................... 4
USB Charging Port .................................................................................................................. 4
USB Power Cord
USB Power Cord (5-volt) as primary power source. A CR2032 battery may be added
•
to back up time and date.
Note: Backup battery will not run the clock display.
When operating with the USB Power Cord, the
•
Clock Factory Restart
Explanation: The factory restart returns the clock to an "out-of-the-box" default state
and often resolves an issue.
Factory Restart:
1. Remove all power (batteries and USB Power Cord) from the clock.
2. Press one of the buttons on the clock at least 20 times to clear all memory.
La Crosse Technology, Ltd.
602-249V2 FAQS
CONTENTS
www.lacrossetechnology.com/support
backlight
can be on continually.
Page 1