La Crosse Technology 602-249 Faqs

The links below will work in most PDF viewers and link to the topic area by clicking the
link. We recommend Adobe Reader version 10 or greater available at:
http://get.adobe.com/reader
602-249 FAQS .......................................................................................................................... 1
Power cord ................................................................................................................................ 1
Clock Factory Restart ................................................................................................................ 1
Clock ......................................................................................................................................... 2
Power Requirements ............................................................................................................... 2
12/24-Hour Time Format .......................................................................................................... 2
Fahrenheit Temperature display. .............................................................................................. 2
Backlight HI-LO-OFF ................................................................................................................ 2
Backlight Auto Dim .................................................................................................................. 2
Manually Set Time/Date: Program Menu .................................................................................. 2
Daylight Saving Time (DST) Adjustment .................................................................................... 3
Set Time Alarm ........................................................................................................................ 3
Activate | Deactivate Alarm ...................................................................................................... 3
Snooze ................................................................................................................................... 4
USB Charging Port................................................................................................................... 4
Clock is blank: No letters, numbers or dashed lines .................................................................. 4
Clock has missing segments .................................................................................................... 4
Power cord
Power cord (5-volt) as primary power source. A CR2032 battery may be added to back
•
up time and date.
Note: Backup battery will not run the clock display.
When operating with the power cord, the
•
Clock Factory Restart
Explanation: The factory restart returns the clock to an "out-of-the-box" default state and
often resolves an issue.
Factory Restart:
1. Remove all power (batteries and power cord) from the clock.
2. Press one of the buttons on the clock at least 20 times to clear all memory.
3. Verify that the clock is blank before proceeding (there may be lines painted on the
screen that will show when there is no power).
4. Leave without power for 15 minutes (very important).
La Crosse Technology, Ltd.
602-249 FAQS
CONTENTS
backlight
www.lacrossetechnology.com/support
can be on continually.
Page 1