Optional Storage (Not Available in All Areas)
1. Install the Z brackets, bolts, and knobs onto the stand base by hand.
2. Install the stand base onto the frame as shown. Tighten knob by hand to secure stand base to rower.
3. Stand rower up vertically.
4. Tighten bolts to stand base using an 8 mm Allen wrench. Tighten to 13 ft.-lbs. (17.6 Nm).
Item
1
2
3
4
Item
1
2
3
Item
1
2
Page 7 of 47
Description
Stand base
Bolt
Knob
Z bracket
Description
Stand base
Knob
Frame
Description
Stand base
Bolt
Qty.
1
2
2
2
Qty.
1
2
2
Qty.
1
2