This message indicates that the monitor cannot synchronize with the signal that it
is receiving from the computer. See
Vertical frequency ranges addressable by this monitor. Recommended mode is
2560 x 1440.
Before the DDC/CI function is disabled, the following message is displayed:
When the monitor enters the Standby Mode, the following message appears:
Going into Standby mode.
If you press any button other than the power button, the following messages
appear depending on the selected input:
Monitor specifications
Dell 27 Gaming Monitor
The function of adjusting display setting using PC application will be
Do you wish to disable DDC/CI function?
Yes
Dell 27 Gaming Monitor
Dell 27 Gaming Monitor
?
No HDMI signal from your device.
disabled.
No
Operating your monitor
for the Horizontal and
G2724D
G2724D
G2724D
│
63