Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: DELL and the DELL logo are trademarks of Dell Inc; Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in
the United States and/or other countries; Adobe is a trademark of Adobe Systems Incorporated, which may be registered in certain jurisdictions. ENERGY STAR is a registered
trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy
efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Page 1
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
DVI Cable Drivers and Documentation media Quick Setup Guide Safety Information Product Features The Dell™ G2410H flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD), and LED backlight. The monitor features Downloaded from ManualMonitor.com Manuals...
include: ■ 24-inch (609.70 mm) viewable area display. 1920 x 1080 resolution, plus full-screen support for lower resolutions. ■ Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side. ■ Tilt, swivel and vertical extension adjustment capability. ■...
Use to mount the monitor. (behind attached VESA plate) Barcode serial number label Refer to this label if you need to contact Dell for technical support. Security lock slot Use a security lock with the slot to help secure your monitor.
Backlight W-LED system Response Time 5ms typical Color gamut (Typical) 80%* * G2410H color gamut (typical) is based on CIE1976 (80%) and CIE1931 (68%) test standards. Resolution Specifications Model G2410H Horizontal scan range 30 kHz to 83 kHz (automatic) Vertical scan range 56 Hz to 75 Hz (automatic)
Weight without stand assembly 8.86 lb (4.02 kg) (For wall mount or VESA mount considerations - no cables) Weight of stand assembly 3.63 lb (1.65 kg) Environmental Characteristics Model G2410H Temperature Operating 5° to 35°C (41° to 95°F) Storage: -20° to 60°C (-4° to 140°F) Non-operating Shipping: -20° to 60°C (-4° to 140°F) Humidity ...
Page 8
15-pin Side of the Connected Signal Cable Number Video-Red Video-Green Video-Blue Self-test GND-R GND-G GND-B Computer 5V/3.3V GND-sync DDC data H-sync V-sync DDC clock DVI Connector 24-pin Side of the Connected Signal Cable Number TMDS RX2- TMDS RX2+ TMDS Ground Floating Floating DDC Clock DDC Data...
In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered normal and within competitive standards. For more information, see Dell Support site at: support.dell.com.
NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area.
Page 11
Back to Contents Page Help on PowerNap Installation To install PowerNap succesfully, follow these steps:- 1. Check Operating System Requirements Windows XP, Windows Vista ,Windows 7 2. Install Entech API Install 3. Install PowerNap Software Install Back to Contents Page Downloaded from ManualMonitor.com Manuals...
Back to Contents Page Setting Up Your Monitor Dell™ G2410H Flat Panel Monitor If you have a Dell™ desktop or a Dell™ portable computer with internet access 1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card. 2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1920 X 1080 again. NOTE: If you are unable to set the resolution to 1920 X 1080, please contact Dell™ to inquire about a Graphics Adapter that supports these resolutions. Back to Contents Page Downloaded from ManualMonitor.com Manuals...
Back to Contents Page Setting Up Your Monitor Dell™ G2410H Flat Panel Monitor If you have non Dell™ desktop, portable computer, or graphic card ® In Windows XP 1. Right-click on the desktop and click Properties. 2. Select the Settings tab. 3. Select Advanced. 4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).
Using the On-Screen Display (OSD) Menu PowerNap Software Setting the Maximum Resolution Using the Dell Soundbar (Optional) Using the Tilt, Swivel, and Vertical Extension Using the Front Panel Controls Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the characteristics as they change.
Using the On-Screen Display (OSD) Menu Accessing the Menu System NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear. Press the MENU button to launch the OSD menu and display the main menu. Main Menu for Analog (VGA) Input Main Menu for Digital (DVI-D) Input NOTE:...
Page 16
Back Press to go back to the main menu. Brightness Brightness adjusts the luminance of the backlight. Press the button to increase brightness and Press the button to decrease brightness (min 0 ~ max 100). NOTE:Brightness control is not adjustable in Energy Smart Plus and ...
Page 17
Contrast Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary. Press the button to increase contrast and Press the button to decrease contrast (min 0 ~ max 100). The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen. Exit Menu Press to exit the OSD main menu.
Page 18
Back Press to go back to the main menu. Select VGA input when you are using the analog (VGA) connector. Press to select the VGA input source. DVI-D Select DVI-D input when you are using the Digital (DVI) connector. Press to select the DVI input source.
Page 19
Back Press to go back to the main menu. Input Color Allows you to set the video input mode to. Format RGB: Select this option if your monitor is connected to a computer or DVD player using the VGA and DVI cable or the HDMI to DVI adapter. YPbPr: Select this option if your DVD player supports only YPbPr output.
Page 20
Saturation his feature can adjust the color saturation of the video image. Use to adjust the saturation from '0' to '100'. Press to increase the monochrome appearance of the video image Press to increase the colorful appearance of the video image ...
Page 21
Back Press to go back to the main menu. Horizontal Po Use the buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+). sition NOTE: When using a DVI source, the Horizontal Position setting is not available. Vertical Posit Use the buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+). NOTE: When using a DVI source, the Vertical Position setting is not available.
Page 22
Back Press to go back to the main menu. Language Language option to set the OSD display to one of seven languages (English, Espanol, Francais, Deutsch, Brazilian Portuguese, Japanese, or Simplified Chinese). Menu This function is used to change the OSD background from opaque to transparent. Transparency ...
Page 23
This feature will help reduce minor cases of image retention. Conditioning If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention. Using the LCD Conditioning feature may take some time. LCD Conditioning feature cannot remove severe cases of image retention or burn-in. NOTE: Use LCD Conditioning only when you experience a problem with image retention.
Page 24
Personalize Downloaded from ManualMonitor.com Manuals...
Page 25
Back to Contents Page Setting Up Your Monitor Dell™ G2410H Flat Panel Monitor Setting the display resolution to 1920 X 1080 (maximum) ® ® For maximum display performance while using the Microsoft Windows operating systems, set the display resolution to 1920 X 1080 pixels by performing the following steps: ®...
Page 26
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
Back to Contents Page Setting Up the Monitor Dell™ G2410H Flat Panel Monitor User's Guide Attaching the Stand Connecting the Monitor Organizing the Cables Attaching the Soundbar (Optional) Removing the Stand Wall Mounting (Optional) Attaching the Stand NOTE: The stand is detached from monitor when it is shipped from the factory.
CAUTION: The graphics are used for the purpose of illustration only. Appearance of the computer may vary. Organizing the Cables After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot to organize all cables as shown above.
Do not use with any device other than Dell Soundbar. Working from the rear of the monitor, attach the Dell Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor. Slide the Dell Soundbar to the left until it snaps into place.
Page 30
(Screw dimension: M4 x 10 mm). Refer to the instructions that come with the VESA-compatible base mounting kit. 1. Place the monitor panel on a soft cloth or cushion on stable flat table. 2. Remove the stand. 3. Use a screwdriver to remove the four screws securing the plastic cover. 4.
Back to Contents Page Troubleshooting Dell™ G2410H Flat Panel Monitor User's Guide Troubleshooting Your Monitor Common Problems Product-Specific Problems CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions Troubleshooting Your Monitor Self-Test Feature Check Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1.
Ambient light Sensor Lens Shortcut Key 1 / Up button Shortcut Key 2 / Down button OSD menu / OK button Back / Exit button Power button (with power light indicator) 4. Carefully inspect the screen for abnormalities. 5. Press the E button on the front panel again. The color of the screen changes to red. 6.
Page 33
Restart the computer in the safe mode. Safety Related Issues Visible signs Do not perform any troubleshooting steps. of smoke or Contact Dell immediately. sparks Intermittent Problems Monitor Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.