Chevrolet GMC 2024 Manual page 9

8 Driving and Operating
To Use the Engine Heater
1. Turn off the engine.
2. Check the heater cord for damage. If it is
damaged, do not use it. See your dealer
for a replacement. Inspect the cord for
damage at each use.
Chevrolet
GMC
3. Remove the engine heater connector
cover by gently prying with a flat
blade tool.
4. Plug the heater cord into the connector
in the front bumper.
5. Plug the cord into a grounded 110-volt
AC outlet that is protected by a ground
fault detection function.
Warning
Improper use of the heater cord or an
extension cord can damage the cord and
may result in overheating and fire.
Plug the cord into a three-prong
electrical utility receptacle that is
protected by a ground fault detection
function. An ungrounded outlet could
cause an electric shock.
Use a weatherproof, heavy-duty,
15 amp-rated extension cord if needed.
Failure to use the recommended
extension cord in good operating
condition, or using a damaged heater
or extension cord, could make it
overheat and cause a fire, property
damage, electric shock, and injury.
Do not operate the vehicle with the
heater cord permanently attached to
the vehicle. Possible heater cord and
thermostat damage could occur.
(Continued)