Panasonic CZ-RTC6BL Installation Instructions Manual page 12

Maintenance func
 RC. setting mode  Auto address  Detailed settings  Sensor info.  Service check
 Set elec. consumption
Check this item as necessary.
Steps 1 and 2 are common operations for each item.
1
Press and hold the
3 buttons simultaneously,
for at least 4 seconds.
Press ,
RC. setting mode
3
Set.
(Select the Code no. and Set data.)
Press
4
Press .
 After Selecting [YES], the unit restarts.
Code no.
01 Main/sub
2F Password change
Auto address
3
Set.
( Select the Code no. [A1] and O/D unit no.)
Press
4
Press
.
 After Selecting [YES], the unit restarts.
Code no.
Set the Auto address for each O/D unit no.
A1
Select the O/D unit no. (outdoor unit) for Auto address.
Attention
 Set Auto address after all units are turned on and 90 seconds or more have passed.
 Operate the units after Auto address is set and 90 seconds or more have passed.
12
, .
→ . (Repeat)
Set this when using 2 remote controllers.
Set the administrator password.
→ .
(Repeat)
2
Select the
item to set.
Press
Set data
• 0000: Sub
• 0001: Main (factory setting)
• 0000 to 9999
• 0000 (factory setting)
Code no.
O/D unit no.
O/D unit no.
• Outdoor unit number
Total number of items
Number for the
selected item
→ .
Code no.
Set data